Table of Contents
A key ︱ set key / up key
B key mode switch key / confirm key
C key ︱ brightness key / down key (0-5 level brightness can be adjusted in any mode, 0 is off)
Mode 1: monochrome mode ︱ the color can be consistent, or the color of each digit can be customized.
Mode 2: flow mode: flow from right to left.
Mode 3: breathing mode ︱ brightness is getting brighter and darker.
Mode 4: Rainbow mode ︱ 6 digits with color gradient.
Mode 5: time line mode ︱ number random jump and freeze in time.
Mode 6: the test mode is displayed from 0 to 9, which is used to check whether the number is installed correctly.
Manual time adjustment
First, press B to switch to mode 6, then press a to enter the time adjustment interface, press a or C to adjust the number, and then press B to confirm and enter the next position. After confirming the last bit, it will flash green and automatically exit and switch to mode 1
Change overall color
First of all, key B switches to mode 4. When you see the color you like, click button a to absorb the current color. Then the machine will automatically absorb the color you selected and automatically switch to mode 1
Change each color
First, switch to No.1 mode by B key, then press a key to enter the color selection interface, then press a key or C key to adjust the color you like, and confirm by B key. (if the same color is needed, adjust the first digit and press confirm continuously to inherit the color of the previous digit)
Restore factory settings
First unplug the power supply, then press and hold the B key and plug in the power supply. When the number changes from red to blue, release the button, reset successfully and enter the No. 6 mode automatically.
Both win8 / 10 system and MAC system are drive free, which is not supported by win7 customers.
Right click on my computer - Management - Device Manager - port to find the port for the clock
Click refresh port, pull down and select the corresponding COM port
Click to connect the machine
Click to change all colors, then select the color you like, and click OK
You can also click a single number, then choose the color you like, click OK, and then disconnect from the computer