Differences

This shows you the differences between two versions of the page.

Link to this comparison view

eleksrom2 [2018/05/28 10:40] (current)
Line 1: Line 1:
 +===== EleksROM丨V3.8.0 Release 3.27.2017 =====
 +==== Brand New CoreXY/XY 丨 Laser/​Servo ​ Mode Easy Switch Firmware Release ====
 +
 +---- 
 +From 3 month ago , we start to upgrade our **EleksLaser** Desktop Engraving Machine and use brand-new **Mana SE** Controller.
 +
 +Cause we have various Desktop Engraving or Draw Machine , So when you get our product with **Mana SE** Controller , 
 +
 +you need to  Set Paramto **Mana SE** Controller.
 +\\
 +
 +**And Now We Have Full AutoMactic Upgrade And Set Param SoftWare Called EleksROM For You.**
 +
 +
 +  Please Attention - The Following Controller ​ Support This SoftWare
 +
 +
 +  Supported Controller:
 +
 +  EleksMaker Mana SE Controller ​ (V1.3/V2.1 Default Is V2.1 With No Version String On It)
 +  EleksMaker Mana Controller ​ (V2.1)
 +
 +\\
 +\\
 +
 +**First Step:**
 +**[[http://​oss.eleksmaker.com/​software/​EleksROM%20V3.8.zip|Click Here To Download EleksROM V3.8]]**
 +
 +When Download is accomplished , Click EleksROM.zip To UnZip it.
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​09776315-55fd-4298-9d5b-b74becc57433.png}}
 +
 +Then you can click on **EleksROM.exe** to directly Run or right click on **EleksROM.exe** to make a **Shotcut** to desktop
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​9b563dfa-6c5b-4e4a-aeef-b4bb0a4a230d.png}}
 +
 +  Please Attention : Please Inset Your EleksMaker Controller First Before Open The EleksROM
 +\\
 +\\
 +
 +**Step2:**
 +
 +
 +When EleksROM `Initialization Complete` . Just Choose `Which EleksMaker Machine` You Are Using And Click On That one IMG (`EleksDraw` && `EleksDrawPro` using the `same` option And you `dont needed` to choose which `Controller` you are using )
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​3e357a28-ab5a-4cbe-b2b1-0b65dbf91f5c.png}}
 +
 +\\
 +\\
 +
 +
 +**Step3:**
 +
 +Then You Can Choose The SerialPort Which Your Machine Is Using And Clik Connect SerialPort.
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​bc392db6-169c-4e6d-a9dd-254a7050a542.png}}
 +\\
 +\\
 +
 +**Step 4:
 +**
 +Then You Just Need Click To DownLoad Button To Automaticlly Download and set param for your Controller.
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​a6567551-4c95-4f58-b983-31131ecdf980.png}}
 +
 +\\
 +\\
 +\\
 +\\
 +\\
 +
 +
 +**From Now , You Dont Need To Click Anything And Just Wait a Few Minute.**
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​534af607-c880-40c0-852d-40f8c8640e69.png}}
 +
 +
 +  Do Not UnPlug Your Controller Out At This Time , It May Broke Your Controller.
 +
 +
 +\\
 +\\
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​f61fc264-f4ab-487d-97fc-49a4b75f2496.png}}
 +
 +
 +
 +  FirmWare Downloading is accomplish at this time.
 +
 +
 +\\
 +\\
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​34c8655e-902b-4296-b9a8-284493de11f2.png}}
 +
 +
 +  Please Wait About 30s. While Controller Is Rebooting.
 +
 +
 +\\
 +\\
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​250f9899-52ea-451e-82f1-01a7e3af3bbc.png}}
 +
 +  Now Controller Is Set Param Automaticlly.
 +
 +
 +\\
 +\\
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​52c59131-f3dd-4e50-8057-4f1c2ab0156e.png}}
 +
 +**All DownLoad Completed , Just Plug Out Your Machine And SoftWare Will Closed Automaticlly. Thanks For Choosing Our Products.**
 +
 +=== EleksROM Release ​ V3.8.0 ​    ​Update Log : ===
 +
 +\\
 +
 +Hi , Thx For Purchase Our Products
 +
 +==== Now we bring Brand New CoreXY/XY 丨 Laser/​Servo ​ Mode Easy Switch Firmware For You ====
 +
 +
 +
 +  EleksRom V3.7 Instruction
 +
 +  In this version , you can just type one line Gcode to the controller to switch system mode.
 +
 +  A0 Laser Mode
 +  A1 Servo Mode
 +
 +  C0 XY Machine Mode
 +  C1 CoreXY Machine Mode
 +
 +  E1 EleksLaser ​ Default: 80/80/Laser Mode/XY Machine Mode //x,y step/mm /Model /Machine Type
 +  E2 EleksDraw ​  ​Default:​ 100/​100/​Servo Mode/CoreXY Machine Mode //x,y step/mm /Model /Machine Type
 +  E3 EleksEgg ​   Default: 20/20/Servo Mode/XY Machine Mode //x,y step/mm /Model /Machine Type
 +  E4 EleksMill ​  ​Default:​ 400/​400/​400/​Laser Mode/XY Machine Mode //x,y,z step/mm /Model /Machine Type
 +
 +  All Machine Default Acceleration is 200, you can type this in Gcode Sender to change the Acceleration:​
 +
 +  $120=500(or whatever acceleration you want) //X Axis
 +  $121=500(or whatever acceleration you want) //Y Axis
 +  $122=500(or whatever acceleration you want) //Z Axis
 +
 +
 +**For EleksCAM you can send Gcode Here:**
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​ad33b3cc-0e30-48ac-bdc9-33192869dbb9.png}}
 +
 +**For Candle you can send Gcode Here:**
 +
 +{{http://​eleksmakeross.oss-ap-southeast-1.aliyuncs.com/​forum/​d5d65952-1faa-446e-83b3-d2d6cc4e05cb.png}}
 +
 +
 +
 +
 +  Please Attention - The Following HardWare ​ Support This SoftWare ​
 +Supported Machine:
 +
 +  EleksLaser A3  (Laser Power : 500mw/​1600mw/​2500mw/​5500mw/​7000mw)
 +  EleksLaser A5  (Laser Power : 500mw/​1600mw/​2500mw/​5500mw/​7000mw)
 +  EleksDraw ​ (With Draw module or Laser Power : None/​500mw/​1600mw/​2500mw/​5500mw/​7000mw)
 +  EleksDrawPro ​ (With Draw module or Laser Power : None/​500mw/​1600mw/​2500mw/​5500mw/​7000mw)
 +  EleksMill ​ (With Moter module or Laser Power : None/500mw)
 +  EleksEgg ​ (With Draw module)
 +
 +
 +
 +
  
  • Show page